OxyCheq Signature Series Single Wing
The 30 and 45 lb lift Oxy Cheq Signature Series wings are rapidly becoming the sought after wings for divers.
Believing that the diver rarely wears out the outer shell of a wing and the weak point of a wing is puncture resistance of the bladder ... we used 1050 ballistic nylon coated with an inner layer of Urethane (very punctre resistant on its own) and then used heavy mil urethane for our inner bladder. Unlike other bladder materials used, urethane is also very easy to patch. This is one tough wing.
If the inner bladder is not that important to you, try the OxyCheq Standard Series Wing.
The use of a soft expandable gussett allows the wings to be as flat as possible when deflated.
The two pair of grommets, spaced 11" apart, allows the diver to fine tune their trim. The large CAM strap slots allows you to use our wings with a variety of other manufactures harness systems. The Signature Series wings can be used with standard back plates with a single tank adapter or with the O-Pac (no single tank adapater required) or the A-Pac (no single tank adapter required).
Our "water drains" efficiently dump water.
A 360 degree zipper allows easy access to inspect or replace the inner bladder.
The stitching used is twice as thick as the normal stitching used in the manufacture of wings.
OxyCheq Signature Series Single Wing - DIR and Technical